五月婷激情-五月婷久久-五月婷六月-五月婷六月丁香-精品国产福利久久久-精品国产福利片在线观看

Shandong Zhongrui Construction Machinery Co., Ltd official website!

National Service Hotline:
15005366588
       CONTACT US
Shandong zhongrui construction machinery co. LTD
Address : 3701 Zhuangjian Road, Kuiwen Economic Development Zone, Weifang City, Shandong Province, China
Zip code:261041
Phone:86-536-2288189 
Manager li:15005366588
URL:m.dahdi.cn
Email:15005366588@163.com 
News Center

YT28 Rock Drill Series: (faults and troubleshooting methods)

If you encounter problems when using the YT28 air-leg rock drill, please try to solve it according to the methods provided below.  
 

Fault category Reason How to eliminate
Drilling speed decreased Working air pressure is too low 1. Check the air supply system of the air compressor and ensure the output pressure .
2. Appropriately reduce the number of rock drills working at the same time, or reduce other gas-consuming operations.
3. Check if there is any leakage in the pipeline, and deal with it.
4. Shorten the length of the gas pipeline (the length of the gas pipe should be controlled within 15 meters), and replace the gas pipe and valve switch whose aperture does not meet the requirements.
Poor lubrication Inject oil according to regulations, and ensure that the oil path of the oil injector is unobstructed. It is strictly forbidden to work without lubrication or use grease lubrication
Incorrect shank size The length of the shank should be 108±1mm, and it should be corrected if it is too long or too short.
Part failure Replace failed parts in time.
The waterway is not clear, water is leaking from the end of the machine head or water is poured into the machine 1. Replace the broken water needle in time.  
2. The center hole of the drill rod is blocked or too small, and the drill rod should be replaced.
3. The diameter of the water needle does not meet the specifications (generally not less than 3 mm), the water needle should be replaced.
4. The water pressure is higher than the air pressure, causing high-pressure water to flow back into the machine and destroy the normal lubrication of the machine. At this time, the water pressure must be lowered.
Insufficient thrust of the air leg or poor expansion and contraction 1. The rubber wrist of the air leg is worn or loose, and it must be replaced or reassembled in time.
2. The frame body and the outer tube are loose, causing the upper and lower chambers to blow through. The frame body must be tightened.
3. The seal is damaged or lost and should be replaced.
4. The expansion ring of the pressure regulating valve is worn out and cannot be accurately positioned and should be replaced.
5. The reversing valve is worn or the reversing valve snap ring (YT24-3.01) is missing, which causes the reversing valve to be shifted. Parts should be replaced and supplemented.
6. The trigger is worn, the stroke is not enough when the reversing valve is compressed, and the air leg is not easy to retract. The trigger should be replaced.
Excessive machine vibration 1. The air leg and the ground support angle is too large or the thrust is insufficient, resulting in a large recoil force of the machine, the angle should be changed to increase the thrust.
2. The shank bushing is worn too much, causing the machine to swing, and the shank bushing should be replaced.
3. The bending of the drill rod causes unstable operation, and the straight drill rod should be replaced.
Broken water needle Seriously piled up at the small end of the piston Replace the piston
Large matching clearance between the shank and the shank When the size of the hexagonal opposite sides in the shank sleeve is severely worn, it must be replaced in time
The center hole of the shank is not correct or does not meet the size requirements The shank should be trimmed as required
Failure of air-water linkage The water pressure is too high Take measures to reduce the pressure.
Air and water paths are blocked Inspect and remove blockages in gas, water pipes, filling valve bodies, and waterways.
Fatigue failure of water injection valve spring Replace the spring
The air barrier and water aprons are ineffective Check and replace the seals
Corrosion Clean and remove rust
主站蜘蛛池模板: 性生活毛片| 日韩顶级片| 一级国产| 亚洲国产精品悠悠久久琪琪| 亚洲韩国—中文字幕| 日韩高清性爽一级毛片免费| 可以免费观看的一级毛片| 久久丝袜视频| 国产免费黄| 色视频在线观看完整免费版| 久久悠| 亚洲综合美腿丝国产一区| 日韩专区一区| 久久国产精品成人免费| 国产国产成人精品久久| 狠狠色噜噜狠狠狠合久| 亚洲精品免费日日日夜夜夜夜| 久久久成人影院| 日本一区免费看| 色综合久久一本首久久| 黄色网址免费在线观看| 97久久久久| 伊人热人久久中文字幕| 色在线网站| 亚洲更新最快| 天天干天天干天天干天天干天天干| 人人看人人添人人谢| 国产高清精品在线| 午夜精品久久久久久久99| 成年在线观看视频| 这里有精品| 美女黄网站色一级毛片| 99久久国产综合精品女不卡 | 国产成人精品久久二区二区| 久久精品综合网| 色香首页| 久热re国产手机在线观看| 久草青青在线视频| 二区久久国产乱子伦免费精品| 色天天综合网| 黄色短片免费看|